*** LEGAL STUFF PART 1 ***
I take no responsibility for any damages to your equipment or software related, or 
unrelated to these files. Make sure you BACK UP ALL of your original files. DO NOT 
overwrite anything.

*** LEGAL STUFF PART 2 ***
This is a repaint for Project Piper PA 28-201-T aircraft for FSX. I used a free 
Paint Kit downloaded from simviation.com, created by Mark Rooks. Mark Rooks uploaded 
this Paint Kit free of charge, and I am offering this repaint free of charge. 
DO NOT sell or trade either of these works for money, or any other type of "stuff".


*** Note ***
  FSX ONLY


*** FUN STUFF ***
   Hello! This is a repaint Project Piper PA 28-201-T in
"Red w White Stripe" livery. This is a repaint of Hauke Keitel's 
Piper PA28 201, modified for Flight Simulator X. Updates and paint kit by Mark Rooks 
of RSDG Aircraft.


   First, download "Piper PA28 201R-T Turbo Arrow Package with Blank Textures"
from simviation.com


   Second, extract files as usual. Place the folder labeled "Project Piper 
PA 28-201-T" into your FSX/SimObject/Airplane folder.


   If you have not already done so, extract the texture file labeled 
"Piper28201R-T_Red_WhiteStripe_DS". This file contains your new 
texture.


   Place the texture folder labeled "texture.Red w White Stripe" into
the "Project Piper PA 28-201-T" folder.


   Open the Aircraft.CFG and add the following text:

[fltsim.##]
title=Piper PA 28 201 T Arrow III Red w White Stripe
sim=PA28R201
model=2
panel=2
sound=
texture=Red w White Stripe
atc_id=N825Y
atc_parking_codes=SMSE
atc_parking_types=Ramp
ui_manufacturer=Piper
ui_type=PA 28 201 T Arrow III
ui_variation=Red w White Stripe
ui_typerole=Single Engine Prop
ui_createdby=Hauke Keitel
ui_paintkitby=Mark Rooks
ui_paintedby=David Shearer
visual_damage=1
description=In the 1980s with the introduction of the PA-28-161 Warrior II with a 119kW Avco Lycoming O-320-D3G engine, alongside the CPA-28-181 Archer II with a 134kW Avco Lycoming O-360-A4M. At the higher performance end of the scale the PA-28RT-201T Turbo Arrow IV in corporated the same powerplant as used in the Turbo Dakota.


   Remember to ensure that you replace the "##" with the next consecutive number in 
the "[fltsim.##]" section, and then save the Aircraft.CFG. Start FSX , choose the
aircraft and Start your flight. Hope you enjoy my work!


Happy Flying!


David Shearer
cobravenom1971@gmail.com
